You are currently viewing our boards as a guest, which gives you limited access to view most discussions and access our other features. By joining our free community, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content, and access many other special features. Registration is fast, simple, and absolutely free, so please, join our community today!
“The following is based on my opinion and research I have done over the past couple years. I plan on continuing to study and work with other investigators in furthering our understanding on how this device works and why we are getting the results we are. I also, have included articles and websites that I feel are important because I have high hopes that further understanding and experiments being done will further contribute to the advancement in the field of the paranormal**
-Chris Fleming
Basic Intro and Info on how I came across this device
While I had seen the K-II meter on the internet before, I never knew what its purpose was or how it could be beneficial in an investigation. I first discovered how to ‘think out of the box” with this device while working with a California Ghost group (Ghost trackers) back in 2005 at the Saddle Creek Lodge. Upon watching the responses the K-II was having with a local investigator. The infrequent light ups didn’t impress me, but the possibility that the ghost was affecting it did. And as they say, sometimes we need to see it or try it for ourselves. I decided to try something. I decided to test my own abilities to verify if what I was feeling was an actual ghost pulling me into the corner of that room.
Upon asking the group to walk over to that particular spot, they held up the device as a few more light ups occurred. Curious, I asked the ghost, that I believed was present, to make it light up 4 times, then 7, then 2, then 1, until I felt it was reacting to my specific instructions. I then began to discuss the differences between the ghost being energy and us being still physical and bound to 3 dimensional rules. Once I felt I gained an understanding, “You can hear me, I can’t hear you!” I began to ask for direct responses to my questions, which I surprisingly soon began to receive. I was amazed with this device for two reasons. 1) I was able to verify my own senses that a ghost was present, not just by a light up, but by specific responses to what I asked when I asked it. If I felt something or saw something in my head, male, female, angry, sad, more than two spirits, etc. I then asked the ghost to tell me if it was YES or NO through the meter. When I felt strongly about it and I felt confidant I was right I asked the spirit if it was a male or female and it responded with what I had felt. The yes and no answers also were accurate. 2) It seemed to be a new form of communication, similar to things I asked for as a kid, flicker of lights, knock on walls two for yes, one for no. Make the curtains move, turn the lights off for yes, drop the temperature in the room, and so on. Yet, this was a more direct and simple way to get a response everyone could see. After this investigation, I decided to buy my own to test it further.
Over the next couple years, I used this device at various locations, but it wasn’t until I got to the Stanley Hotel that I used it in front of more than 5 people. Quickly people saw how much of a great tool it could be. Whether one was psychic or not, here was a tool that could respond to a conscious form of energy and establish what seems like a two way communication with the ghost world. That is my theory, and it the results we have seen seem to support this.
Soon people began asking me where they could get one. With that in mind I decided to offer it on my website. I don’t own the device but I support what it does and can do, in not only picking up levels of EMF but also establishing a form of communication and detecting various forms of conscious energy. Don’t get me wrong, I take full advantage of this device and use it around the house and in hotels to detect any leakage that can be dangerous to my health. You would be surprised what readings I have gotten in some hotels and then politely asked to be moved to another room since the levels are dangerously high. So it can be multi-purpose in its use.
Getting back to the ghost thing….while this all seems remarkable at first, it feels only natural now as we look at various forms of communication we have had over the centuries. Morse code knocks and raps in prison cells that inmates use to communicate, Cell phones lighting up when receiving a signal, and the list can go on.
Things you need to take into consideration when using the K-II meter:
1) This device was originally designed for electricians to detect high levels of exposure and leakage of EMFs.
2) Electromagnetic field strength is displayed by five multicolored light emitting diodes (LEDs) corresponding to levels of electromagnetic field strength.
3) The K-II operates from a single 9-volt battery located inside the back of the instrument.
4) The K-II is a single axis instrument, meaning that magnetic fields will be detected only in the horizontal or vertical axis depending on the orientation of the instrument by the operator.
5) This device will only detect fluctuating electromagnetic fields. For example a stationary magnet cannot be detected because the magnet is not inducing a voltage in the sensing coil of the instrument.
6) This meter will detect low frequency ranges of 50 to 1000 Hertz and very low frequency ranges of 1000 to 20,000 Hertz. The K-II LED’s show the strength of the detected magnetic field rate from1.5 to 20+ milligauss.
7) One of the important features of the instrument is its rapid response to electromagnetic fields. While other instruments seem to have a slight delay in response, the K-II is virtually instantaneous in response to electromagnetic fields. This makes the K-II very sensitive to short-term transient fields.
8) Operating the device is very simple. Pressing the thumb switch turns on the K-II and starts a self-test. The light emitting diodes light up in succession and then settle down to a single green light which indicates a range of zero to 1.5 milligauss. Releasing the thumb switch shuts off the K-II. The instrument can be kept on continually by pressing the switch and by inserting a small coin in the opening above the switch.
9) The diodes will light up once when you first press the meter down and keep it done once it settles you can begin. DO NOT MISTAKE THIS LIGHT UP AS A SIGN. This only means the meter is on as long as you keep it pressed down.
10) Turn cell phones off. If you do have a cell phone, keep it at least 4 feet away. Incoming calls and outgoing calls WILL cause the diodes to light up violently until the call is answered or hung up. So you should know better to have a cell phone on during an investigation anyway.
11) Always do a sweep of the room or area for any spikes on the diodes which could mean an electrical discharges form outlets, cables in the floor, wall or ceiling. Always spot this first to rule out any interference and or improper readings.
12) Keep in mind spikes caused by #11 will mostly be constant and keep the diodes lit until you step or move away from the vicinity of those EMFs. Upon practice you can easily tell the difference.
13) Keep in mind #12 applies to all EMF detectors and should always be followed and tested
14) Watch the pressure you have on the K-II meter. You don’t want to wear out your thumb, nor do you want to have it slightly coming off the meter and lighting up the diodes or spiking. This is a false reading. Every time this happens say out loud “that was me!” so everyone in the room knows that it was not an ACTUAL response that you are looking for in your investigation. I can’t tell you how many newbie’s mistake this for a sign. Overtime you will know the difference when you see it yourself and can help those in need of understanding the difference. Like anything else this is technique and tool is new to the field and people have to learn how to properly use it. No different than orbs on digital cameras and background noise on EVPs.
15) You can modify the casing to house an on/off switch. There are people out there that will do it for you. DO NOT modify where the button is on the casing nor eliminate the use of the on/off press button as it was originally intended. This defeats the overall use of the meter and you have now limited its capabilities. Create a side switch so you can either turn it on and leave it or press the button as it originally was designed and use it that way.
16) I believe that the conscious energy that is respondent to the meter is a form of PK energy that can be caused by an entity, ghost, or spirit, and maybe even ourselves if one is powerful enough to send that form of energy out. While an actual presence of conscious form of energy alone may or may not cause it to go off, I am leaning more towards a form of PK utilized by a conscious energy that is present and wants to communicate when contact is established. This seems more likely as meters put side by side have had different readings and in many cases one goes off while the other doesn’t meaning the energy being sent is selective. If it is selective that means it has to have been chosen and an actual presence in front of it would cause both to go off not just one. The conscious energy form (ghost or spirit) seems by all accounts to be deciding which meter to use and in experiments we have performed we have watched it go from one meter to the next as asked in a large room as well as one meter on the floor (with coin in it) go off also when asked, while all other meters waited their turn.
17) I have not had success at every location with this meter. I had very little at Waverly, a lot one night at the Queen Mary and none the next day. Keep in mind the location, people around and if whether or not there is a presence that is not only there, but wants to talk to you.
18) Many ghost groups, investigators and adventurers are studying this device further and its capabilities. This is fantastic and I hope and believe that this will develop into something even greater.
19) I know there are many skeptics and even ghost investigators that just don’t believe that this is possible and I understand. See it for yourself by working with a ghost group or attend an event at a haunted location and watch how people are using it. For every story I hear of someone that is not having much success I hear a couple more that are having amazing success.
20) I will be happy to show people how properly use it at events I attend. Just ask me!
I believe this is definitely a tool that can be added to the field of paranormal investigating and demands further study and breakdown to figure out how it works. I believe this is a step in the right direction to developing even greater devices and shortening our gap of communication with the spirit world. I look forward to the day we can just pick up a type of phone and chat with a loved one on the other side. Whether this is possible or not, all we can do is try to use what we do know work towards building that bridge.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Home
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in
